Hydro Jetting · Highland, CA

Everyone has snaked a drain and thought the problem was solved, only to have it come back a month later. That's because a cable punches a small hole through the clog and keeps going. The grease, roots, and scale coating the pipe walls are still there, waiting to catch the next thing that goes down. That's why hydro jetting in Highland, CA has become the go-to for lines that clog again and again.

A jetter uses a specialized hose and nozzle to blast water at around 4,000 PSI. Rear-facing jets pull the hose down the line, and forward jets cut into the buildup. Done right, it scours the pipe back to bare wall. In Highland's older neighborhoods and along the edges of East Highland Ranch, we see a lot of kitchen lines coated with hard grease from years of cooking. Jetting is the only real fix short of replacing the pipe.

We always run a camera before we jet. Highland has homes with clay laterals from the 60s and 70s, and jetting a cracked clay pipe with root intrusion can turn a small crack into a bigger one. Once we see what we're dealing with, we pick the right nozzle and dial the pressure to match. A grease line under a kitchen slab gets a chisel nozzle. A root-choked lateral gets a root-cutting head. A commercial main gets a bigger truck and more flow.

Restaurants and commercial buildings around Base Line, Boulder, and Greenspot are big candidates for jetting on a schedule. When a restaurant backs up on a Friday night, it's not just messy, it's lost revenue. Setting up a quarterly or twice-a-year jetting plan is much cheaper than closing the doors. For homes, a one-time jetting on a repeat-offender line usually keeps it clear for years, especially when we pair it with a small change like a strainer or a cleanout that makes future service easier.

We're upfront about when jetting isn't the answer. If the camera shows a bellied pipe, a collapsed section, or heavy pipe damage, no amount of water pressure fixes that. In those cases we'll show you the footage and talk through spot repair or a section replacement. When jetting is the right call, though, it's the fastest way to bring a drain back to full flow without tearing anything up.